Install a virtual CD/DVD drive in your existing system. So many applications are available there. You will need DOSBox.065 or higher and the Installation files for Windows 3.1, 3.11 or Windows for Workgroups 3.11. Downloads for these drivers can be found below. You will need to create a folder for your Windows 3x 'C:' drive. Make a sub-folder to hold the Windows install files. This project was inspired by a previous project to resurrect my old Packard Bell, my first computer that, not coincidentally, ran MS-DOS 6.2 and Windows for Workgroups 3.11. Rebuilding and enhancing it from a hardware perspective was a fun experience, and now I'm doing the same from a software perspective.

Without any second thought, we all know that Windows 10 has gained popularity and is still getting the same. More and more users are choosing Windows 10, and hence a ubiquitous question arises, how to install Windows 10 on a new hard drive?

Before installation, one should know that they can’t get a fresh system installed in their system without all their prior data and apps being erased. So, in this particular case, it is advised that the users should make sure to take the backup of all the information restored in the system before opting for fresh install of Windows 10 on a new hard drive.

Classic Methods on How to Do a Fresh Install of Windows 10 on a New Hard Drive:

There are two purely classic methods for a fresh install of Windows 10 on a new hard drive:

Method 1 Primarily Create Installation Media & Install Windows from Scratch

Under this specific method, users just need to download and create installation media either on a flash drive or DVD & can install it from there.

It is one of the simplest ways in case you were searching for how to do a fresh install of windows 10 on a new hard drive?

Method 2 Reset & Remove Everything

In case you’ve already upgraded to Windows 10 and looking for the solution for fresh install of Windows 10 then it is a more straightforward method.

You can directly reset your Windows 10 system, and it will bring it back to a fresh state. This particular method involves a lot of steps as the users have to first take the backup before going ahead with this process.

Solution for How to Install Windows 10 on a New Hard Drive Without Operating System

In this particular case, the users need to have a Windows 10 disc or iso image to install it via pendrive or through disc. After all of this, once your computer boots with your Windows 10 disc or with the pendrive, then the setup will start.

With this way, you will install a fresh copy of Windows 10 in your laptop or PC. So, the users query solution for ‘how to install windows 10 on a new hard drive without operating system’ is resolved.

Steps for How to Do a Fresh Install of Windows 10 on a New Hard Drive

It is suggested to use the below-mentioned steps only when you’ve created your PC’s temporary full backup before going ahead. However, a clean installation of Windows 10 is a straightforward and smooth process that does not have hassle.

Start your device with Windows 10 USB media
Press any key to boot from the device on prompt
Click on the ‘Next’ button on the ‘Windows Setup’

Now, click on the Install now button

If this is your first time installing Windows 10, then type the product key, and in case you’re reinstalling the OS, then click on ‘I don’t have a product key’ option to continue.

Click on the Next button
Now select the edition of Windows 10 and make sure that this selection must match the edition of your product key activation.

Click on the Next button and tick mark the ‘I accept the license terms’ option to continue.

Click on the Next button and click on the ‘Custom: Install Windows only (Advanced) option to continue with a clean installation.

Select the partition with the current installation and then click on the Delete button
Click on Yes button

Now, select the empty drive (Drive 0 unallocated Space)

Finally, click on the Next button

Once the above steps get completed, then the setup will install Windows 10 on the computer. Moreover, executing the above pointers, users will also get a detailed solution for how to do a fresh install of Windows 10 on a new hard drive.

Install Windows From Recovery Drive

Things you Should Keep in Mind Before Installing a Windows 10 Feature Update

Check the manufacturer’s website to make sure if your system is compatible
Download & create backup reinstall media for your current version of Windows
Ensure that your system has enough disk space
Before installation, make sure that your PC is charged and is plugged in
Disable antivirus utility
Disable background software
Disable the peripherals and external USB devices
Switch to the local user account

The steps and description mentioned in this article will help you with a smooth installation of Windows 10 on a new hard drive.

Windows 3.1 is an operating system created by Microsoft, released in April 1992. There is an updated version called Windows for Workgroups 3.11 which adds support for networking and there is a (very rare) updated version of Windows 3.1, simply named 'Windows 3.11'. This article covers both.

Install windows 3.11 from hard drive free

Install Windows 3.11 From Hard Drive Download

Running on CollabVM

Windows 3.1 depends on MS-DOS. You must install MS-DOS first before installing Windows 3.1.

There are no USB drivers for Windows 3.1, as USB did not exist at the time (releasing nearly 4 years after Windows 3.1's initial release), so a perfect mouse is unfortunately not possible.

There is a VMWare graphics adapter for Windows 3.1 floating around. For PCNet drivers, you can find them here.

New Hard Drive Install Windows

386 Enhanced Mode for Windows 3.1 works in QEMU, but it's a little buggy. If it freezes up for you, use WIN /S to start it in standard mode.

For an MS-DOS installation guide, check out MS-DOS for tips. Hard drive icons mac download.

Starting up

QEMU

Pre-installation

Make a qcow2 image (or a raw image if you want) by typing

Install Windows From Hard Drive

150M can be replaced with however big you want the hard drive to be (with M standing for Megabytes). Windows 3.1 is VERY compact (being released in the early 90s) and only requires around 8 MB of disk space. However, if you want your users to install/run any programs, we recommend at least 50 MB of space. Windows 3.1 requires at least MS-DOS 3.1, we recommend MS-DOS 6.22 for best performance however. You can also run 3.1 under FreeDOS, but a few things don't work properly when running under FreeDOS (mainly 386 enhanced mode).

When that's done, run the following command:

No KVM, MS-DOS works with KVM but Windows 3.1 freezes instantly, so we don't want it. This command does not require root privileges.

We need to install MS-DOS first, so you need to locate:

MS-DOS 6.22 installation floppies
Windows 3.1 installation floppies

You can find both of these at WinWorldPC or Kirsle.net. Install MS-DOS like you would on a normal computer (all you have to do is hit 'enter' repeatedly). To change the floppy disks, press CTRL + ALT + 2 to switch to the QEMU console, and type 'change floppy0 (DOS Floppy Disk 2).img' and so on. Press CTRL + ALT + 1 to switch back.

Install Windows From Network Drive

Once MS-DOS is installed we can begin installation of Windows 3.1. Change floppies the same way we did with MS-DOS. Follow the installation guide. If you have ever installed Windows 95, XP, or even Windows 10, it's basically the exact same thing, it's really simple.

Once Windows 3.1 has been successfully installed, you can install the drivers (guide is available here) and either install programs or quit.

Install Windows From Hard Disk

You may want to add Windows 3.1 to start with MS-DOS. This is really simple. Exit Windows 3.1 (or use the MS-DOS Prompt), and type 'edit C:autoexec.bat'. At the last line, type start C:WINDOWSWIN.COM and save the changes. Your VM will now start with Windows 3.1.

Install Windows 3.11 From Hardrive